Shrapnel/spring products can achieve durability tests of more than 5 million times of life requirements. Bending products can realize the precision control requirements of bending angle +/-0.5° and flatness below 0.03mm.

Orienson has a wealth of experience in the design and manufacturing of edge rolling parts, all parts can achieve a better rounding effect and similar pin wrap round parts can be controlled in the roundness within 0.03mm.

Through the fine blanking process, the punching effect without collapse, full-bright section, and burr-free trimming can be achieved. The roughness of the fine blanking surface can be controlled within 0.3um, the position and size accuracy can be controlled within 0.01mm.

Orienson focuses on the deep drawing of copper, steel, aluminum, stainless steel, etc. Products can achieve the diameter of 1.5mm and thickness 0.1mm or more straight-tube, step, necking, thinning, non-thinning, square-round shape mixed deep drawing, etc.

Orienson can produce the copper stamping parts of the material thickness from 0.05mm to 6.0mm with different grades (C1100, C5191, C2680, C7025, etc.) and different hardness (1/2H, 3/4H, full hard, etc.)

Orienson can produce the stainless steel stamping parts of the material thickness from 0.05mm to 6.0mm with different grades (SUS301 SUS304, SUS316, SUS430, etc.) and different hardness (1/2H, 3/4H, full hard, etc.)

Orienson can produce the steel stamping parts of the material thickness from 0.05mm to 6.0mm with different grades (SPCC, SPCE, 65Mn, 1.0402, 1.7015, etc.) and different hardness (1/2H, 3/4H, full hard, etc.)

Orienson can produce the aluminum stamping parts of the material thickness from 0.05mm to 6.0mm with different grades (AL1060, AL3003, AL5052, AL6061, AL7075, etc.) and different hardness (1/2H, 3/4H, full hard, etc.)